Results 1 to 9 of 9

Thread: Martin Warthog Magnum Question

  1. #1
    Jeff
    Guest

    Default Martin Warthog Magnum Question

    The other day, I bought an old Martin Warthog Magnum that I found on Craigslist.

    I'm kind of curious about how old it is, and I was hoping someone on here could help. It looks absolutely nothing like this thing, it looks more like this, except it seems to be all wood. I think it's relatively old, judging from pictures of older Warthogs I found on the internet.

    The riser has "2431" and "WHP 53247" written on it, and the limbs have "C something L 42987-4" on them.

    I don't know if this will help at all, but the draw weight is 45 - 60.

    By the way, I'd also like to know how to adjust the weight on it. I know zip about compound bows. I only really bought this thing because the seller tossed in a nondescript recurve and some arrows for free with it. Still, it's a pretty cool bow.

  2. #2
    flytier17
    Guest

    Default

    Yes, you have the older warthog. It was discontinued, and ressurected under a new design. Martin does that every now and again.

    Just turn the limb bolts at the base of the limb. Make sure to turn both the same # of turns. Also, do not turn them more than 5 turns from the bottomed position. No need to crank them down to bottom them either; don't want to damage the mounts.

    Alec

  3. #3
    Jeff
    Guest

    Default

    Oh, neat. Any idea when the older one was discontinued?

    Thanks...I think it's already at it's lowest setting, and I'm just very, very weak :p

    One other thing, it is really, really loud. Is that normal?

  4. #4
    flytier17
    Guest

    Default

    The older bows were a bit louder. This is normal.

    If you are a recurve shooter, than any compound will be really loud.

    You'll build up muscle as time goes on. Of paramount importance however, is your comfort. Do not exceed what your body says is too much. With regular practice, you will have no problem with it. I've seen small archers pull 70-80lbs no problem because they shoot every day, and for a long time. I've also seen a firefighter who was really fit and muscular come into a proshop. He was getting into archery, and was trying some bows out. He ended up dryfiring a 70lb. Bowtech Guardian because he couldn't roll the cams over peak as he was not used to using the necessary muscles. Archery uses back muscles more than arm muscles actually, and they will get stronger.

    Alec

  5. #5
    Senior Member bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,635
    Post Thanks / Like

    Default

    Alex is correct about the strength needed to shoot a bow. It's not so muc about brute strength as it is about the groups of muscles involved and the direction they are now pulling vs what they are used to. Take your time and avoid any injuries.

    As for the noise, you should know that most bows are somehat noisier with the weight backed off due to the rigging (cables/string) not being as taut. This is just for information. Again, don't go getting muscle strains trying to prove anything. Learning good shooting form and practicing such will help develop the necessary muscles. As the old saying goes, Rome wasn't built in a day.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  6. #6
    Jeff
    Guest

    Default

    Well, the weight only goes up to 60, I don't think that's too over the top, most of the modern bows I look at go a lot higher. I think it's set pretty low, and I don't have TOO much trouble pulling it back. If I had somewhere to shoot it every day, it wouldn't be a problem, but I don't.

  7. #7
    flytier17
    Guest

    Default

    When the snow is blowin here, I shoot in the basement a 4 yds for the muscle and form practice.

    60 is reasonable if you can handle it. 70 is unnecessary.

  8. #8
    Junior Member
    Join Date
    Jul 2014
    Location
    Homestead, Florida
    Posts
    8
    Post Thanks / Like

    Default

    Any one knows where I can a set of limbs for Warthog Magnum 65-80.

  9. #9
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,857
    Post Thanks / Like

    Default

    Quote Originally Posted by Barretog View Post
    Any one knows where I can a set of limbs for Warthog Magnum 65-80.
    Not right offhand! You're going to need to put an ad up in the classified both here and on ArcheryTalk.com to find those limbs. Would probably be much easier to find lighter weight limbs for the bow, but even then it will be through an ad ion the classifieds. Unless of course you get lucky and find some that will work. I have some limbs off a mid 90's Martin Lynx, not sure of the weight, but think they're 60 lbs. They are 16" long, 1 9/16" wide at the butt of the limb, and 7/16" thick at the butt ( where it goes onto the limb cup ) rides on 3/8" ball bearings. In the forks, they are 11/16" wide and 4 1/4" from bottom to axle hole. If those dimentions will work you can have 'em for $30 + shipping.
    Lynx Limbs.JPG
    Lynx limb assembly.JPG
    Attached Images Attached Images
    Last edited by elkslayer4x5; 08-15-2014 at 11:27 AM.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •