Martin limbs

[hotrod26]

Are the 14" limbs marked 5M 60# or 70# limbs?

[SandSquid]

Depends upon the geometry of the riser and the cam system....

To adequately answer you we'd need to know:
What limbs are on it now and whet the current poundage is.
Then employ some simple "MartinMath(tm)" to calculate up or down to your target range.

In between each number you will have a difference of about 5 lbs. of weight.
In between each letter it is a difference of about 2 lbs. in weight.

If you need to go up 5 lbs. all you need is one number. 1/2/3/4/5/6/7/etc.
If you need to go up 2 lbs. all you need is one letter. L/M/H

If you had 3L and wanted 10 more pounds, 5L
If you had 3L and wanted 4 more pounds, 3H
If you had 3L and wanted 7 more pounds....4M

simple huh?

[hotrod26]

Sandsquid,

I currently have limbs on my 07 Pantera which have 7M on them. So what is the max and minimum drawweight on these limbs?

Rod

[dbd870]

Those should give you 60-75# on your Pantera.

[hotrod26]

So I guess to get a 60# max I would need 4M. Am I correct in that assumption?

[bfisher]

That is correct. You can find this info on Martin's home website. Look under Tech Info.

[Illyan]

Hello, the limb chart for the Pantera is Right??

On chart, 60lbs for a Pantera it's a 4M limb set...and 70 lbs for a 6M limb set

Because i have on my Pantera a 5H marks on my limbs...and i had never reached to max of 68 lbs...

Saturday, my lower limb had broken and i will receive a set of 7L limbs...

I may hope a 73 lbs max...but i want to be sure

Thanks