Results 1 to 4 of 4

Thread: MPro mod question

  1. #1
    rnfrazier
    Guest

    Default MPro mod question

    I have a Bullet x coming but the guy only had the F5 mod which is supposed to be 28".I shoot 27-27.5"dl. My question is that I was wondering if there is a half inch adjustment up or down or am I going to have to find an F4 mod.

  2. #2
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,034
    Post Thanks / Like

    Default

    You can change the drawlength on an MPro Cam by changing the string from post 1 to post 2 and vice versa. You will find these marked posts on the Cam itself. I am not sure if you will enhance your draw by 0.5" or shorten it by 0.5" if you change the length so you will have to try that out.
    (2) Hoyt PCEXL

  3. #3
    Senior Member
    Join Date
    Dec 2006
    Location
    Columbia, SC
    Posts
    188
    Post Thanks / Like

    Default

    If the F5 is giving you a 28" drawlength with the string on the #1 post moving it to the #2 will give you a 27.5" drawlength. I had to do this on my Pantera. I am a 28.5" drawlength so I put the 29" mod on and move to #2 post and it is at 28.5".

  4. #4
    rnfrazier
    Guest

    Default

    Thanks for the info. Just in case I think I will try to find an F4 mod just in case

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •