MPro mod question

[rnfrazier]

I have a Bullet x coming but the guy only had the F5 mod which is supposed to be 28".I shoot 27-27.5"dl. My question is that I was wondering if there is a half inch adjustment up or down or am I going to have to find an F4 mod.

[Montalaar]

You can change the drawlength on an MPro Cam by changing the string from post 1 to post 2 and vice versa. You will find these marked posts on the Cam itself. I am not sure if you will enhance your draw by 0.5" or shorten it by 0.5" if you change the length so you will have to try that out.

[hotrod26]

If the F5 is giving you a 28" drawlength with the string on the #1 post moving it to the #2 will give you a 27.5" drawlength. I had to do this on my Pantera. I am a 28.5" drawlength so I put the 29" mod on and move to #2 post and it is at 28.5".

[rnfrazier]

Thanks for the info. Just in case I think I will try to find an F4 mod just in case