Results 1 to 6 of 6

Thread: Martin Pantera With Nitrous

  1. #1
    Wabohnter
    Guest

    Default Martin Pantera With Nitrous

    i have a 07 Pantera with Mpro cams and 7L limbs.what can i expect if i were to put a set of nitrous C cams on it? will i have a poundage increase?

  2. #2
    flytier17
    Guest

    Default

    Poundage increase? What is it at now?

    My Pantera has the "C" cams, and 2H limbs. It peaks at 55lbs. I'm guessing from that your setup will run 78-809lbs at peak.

    Alec

  3. #3
    Wabohnter
    Guest

    Default

    flytier, im in the process of putting it together now.with the Mpro and the 7L limbs it was a 55-70# bow.but i thought id read somewhere my draw weight would also increase around 10lbs.if so is this good for the limbs? should i get softer limbs to get it back down to the 55-70 range?

  4. #4
    flytier17
    Guest

    Default

    You can back the bolts off too. For a peak of 70lbs, you would be looking for 5M limbs. 5H limbs would probably be 72-74lbs.

    I guess your estimate of 10lbs was close. Like I said, 78-80lbs is probably where it will be.

    Alec

  5. #5
    Wabohnter
    Guest

    Default

    that 78-80 is just to heavy how much would 6L limbs drop the weight.

    ANY BODY GOT A SET OF 5M OR 5H CAMO LIMBS THEY WANT TO GET RID OF !

  6. #6
    flytier17
    Guest

    Default

    Every # (1,2,3,4,5...) is a 5lb increment.

    Eevry letter (l, m, or h) is 2-3 lbs increment.

    So if a 2H gives me 58lbs peak, go up 20lbs for the "2" to the "6", and down say 5 lbs for the "H" to the "L". So I'd say a 6L would give you 72lbs, give or take a pound either way.

    Alec

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •