Results 1 to 2 of 2

Thread: Bow weight and synchronization

  1. #1

    Question Bow weight and synchronization

    Hi all...

    I own a Martin Razor-X, (Axle to axle: 45" Brace height: 8 6/8 top and bottom.
    Max draw weight: 60#. Nitrous Dual-Cam system, draw length: 27 1/8" to 27 4/8", depending on the release aid)

    The problem I have is that the bow continuously gets out of synchronization without any change to the setup, or peripheral equipment. Lately I also tried to raise the draw weight to about 55# and discovered that the highest I can go is 51#. I checked the string and cables, took them off and reinstalled them, tried to change the number of twists. Nothing helped, the bow will not go above 51#.

    Any ideas as to the reason ? Can my string and cables be stretching ? Could this be the reason ?.



  2. #2


    It does sound like your cables are stretched. I had one do that to me one time. i put new strings on and back to normal

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts