Bow weight and synchronization
I own a Martin Razor-X, (Axle to axle: 45" Brace height: 8 6/8 top and bottom.
Max draw weight: 60#. Nitrous Dual-Cam system, draw length: 27 1/8" to 27 4/8", depending on the release aid)
The problem I have is that the bow continuously gets out of synchronization without any change to the setup, or peripheral equipment. Lately I also tried to raise the draw weight to about 55# and discovered that the highest I can go is 51#. I checked the string and cables, took them off and reinstalled them, tried to change the number of twists. Nothing helped, the bow will not go above 51#.
Any ideas as to the reason ? Can my string and cables be stretching ? Could this be the reason ?.
It does sound like your cables are stretched. I had one do that to me one time. i put new strings on and back to normal