Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Source for Nitrous X Mod C

  1. #1
    dougkellermann
    Guest

    Default Source for Nitrous X Mod C

    Does anyone know who has the Nitrous X Mods? I am looking for a C Mod.

    thanks Doug

  2. #2
    Senior Member
    Join Date
    Oct 2007
    Location
    Bartow, Fl.
    Posts
    532
    Post Thanks / Like

    Default

    Mods are the same Cams are different.

  3. #3
    dougkellermann
    Guest

    Default

    does that mean any C mod will work? Or is it any Nitrous C mod?

  4. #4
    Senior Member
    Join Date
    Oct 2007
    Location
    Bartow, Fl.
    Posts
    532
    Post Thanks / Like

    Default

    You are confusing the matter with your verbiage (no offense). Yes any NOS module will work on any of the three cams,A,B or C cams.

  5. #5
    dougkellermann
    Guest

    Default

    I have the Nitrous X B cam and module that has a draw length up to 28 inches I want to go to 28.5 inches. I thought I only needed to get the C module to extend the draw length.

    thanks
    Doug

  6. #6
    SandSquid
    Guest

    Default

    You need the the C Base CAM.
    Move your existing modules off the B base to the C base.

  7. #7
    dougkellermann
    Guest

    Default

    thanks

    I dont think it is worth the $$$ for a 1/2 inch draw increase....

  8. #8
    Senior Member
    Join Date
    Oct 2007
    Location
    Bartow, Fl.
    Posts
    532
    Post Thanks / Like

    Default

    Quote Originally Posted by dougkellermann View Post
    thanks

    I dont think it is worth the $$$ for a 1/2 inch draw increase....
    What bow do you have B cams on and what limbs do you have?

  9. #9
    dougkellermann
    Guest

    Default

    07 Martin Slayer X
    Limbs are Slayer X 35-50 lb

  10. #10
    Senior Member
    Join Date
    Oct 2007
    Location
    Bartow, Fl.
    Posts
    532
    Post Thanks / Like

    Default

    You could see if someone would trade you over on AT but then again if you went to a C cam you will lose about 10 lbs. of draw weight.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •