Results 1 to 2 of 2

Thread: Firecat Draw Length Change

  1. #1
    Join Date
    Dec 2008
    Post Thanks / Like

    Default Firecat Draw Length Change

    I've been shooting my new bow and it feels like I may need to shorten my draw length a half inch if possible. Can this be done through the draw mods or only by the draw stop? If not what markings does the mod have to be on to get a 28" draw length? Any help will be appreciated.
    '10 ALIEN X 28.5DL X 70#
    HHA OL 5519
    QAD Pro Hd
    125grn Rage

  2. #2


    Just move one set of holes on the draw length modules. I can't remember if the numbers go higher for making it shorter but that easy to see which way to move them. You don't need a press just take them off with the bow at rest. Important to get them both on the same set of numbers. You will need to move your draw stop to prevent overdrawing the cams.

    What I do is pull the bow to full draw and look at the string coming off the back of the draw length modules to see if it's resting on the flat section of the module. It takes a bit of move it and look at it to get it right, but it's easy.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts