Results 1 to 8 of 8

Thread: Do 09 martin moabs need bowpresses to be worked on? adjusting draw length?

  1. #1
    stoop14
    Guest

    Default Do 09 martin moabs need bowpresses to be worked on? adjusting draw length?

    I was just wondering if the 09 martin moab needs a bow press to change the mods for the draw length, or does it need to be in a bow press to move the cable too the other notch to do 1/2" draw length adjustments? Or does it need to be in a bow press to change the string? I was told to buy a martin because of how user friendly they are, since i don't have a pro shop anywhere near me

  2. #2
    RogerSr
    Guest

    Default

    No, you do not need a bow press to do any of them, you can even change the limbs without a bow press, all you do is back the limb bolts out till you can see daylight through the barrel nuts, to change the draw length mod just take the two screws out and change them,

  3. #3
    stoop14
    Guest

    Default

    what about moving the cable to the half inch peg does that take undoing the limbs or a bow press?

  4. #4
    RogerSr
    Guest

    Default

    Just back the limb bolts out till you can see light through the barrel nuts,back them out a few turns at a time, first one side then the other,when you can just see through the nuts stop, take the cable off and put it on the other one, and tighten the bolts back up,thats all there is to it,
    have fun!

  5. #5
    stoop14
    Guest

    Default

    now could the bow string come all undone if i screw up loosening the limbs? and what are the limb bolts haha

  6. #6
    RogerSr
    Guest

    Default

    Just don't take the limb bolts all the way out! and watch were the string is, make sure that the string is on the cam and the wheel when you tighten the bolts, the string will not just come apart.
    Last edited by RogerSr; 08-22-2009 at 08:20 PM.

  7. #7
    stoop14
    Guest

    Default

    i think thats kinda silly how you don't need to do all that work to change your draw by a inch but you do if you need half a inch more or less.

  8. #8
    RogerSr
    Guest

    Default

    most of the time people change in one inch increment, and their are some bows that have half inch increments on their mod's, but not this one, you can also go one inch longer and use the draw stop to adjust it back down,but that will change your letoff, good luck.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •