Results 1 to 2 of 2

Thread: Panther Fuzion cam axle play

Hybrid View

  1. #1

    Default Panther Fuzion cam axle play

    Hello, I have a Panther with Fusion cam which is a few years old. I had it in the bow press today and I noticed it had developed excess play on the bottom axle. The cam wobbles back and forth about 3/8" Is there anything that can be done with this? Is it possible to update with newer cam that has roller bearings? Thank you!

    Kevin H.
    Pittsburgh, PA

  2. #2
    Join Date
    Oct 2005
    Post Thanks / Like


    Sorry for the long delay in responding. There are two options for correcting the problem....which is likely bushing wear in the Fuzion Cam. The bearing can be replaced, quite easily if here in the factory. You may want to discuss this option with your dealer or give Customer Service a call (509-529-2554) as this would be the least expensive option. Second, yes...the DynaCams, which do feature ball bearings, can be used to directly replace the Fuzion Cams.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts