Does anybody know if the black plastic washers(inside spacers?), on the axles... are suppose to be the same width? I have the Sceptor 4 Elite, furious dual cams.
Coop
Cam washers..
Does anybody know if the black plastic washers(inside spacers?), on the axles... are suppose to be the same width? I have the Sceptor 4 Elite, furious dual cams.
Coop
Senior Member
spacers
I have three Martin bows, each has the X-shoot-thru system, with long axles on the bottom. Each bow has differnt size spacers mixed on each axle. By mixed I mean that there are differnt size spacers togaher on each axle in order to take out any 'slop' ( no extra space ) Does that help?
http://eastoutfitter.tripod.com/index.html
http://cascadianbowmen.com/
Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade
Basically..
I'm just making sure that I have the right size(width) spacers on each side of my module & cam. My spacers look about 1/8" thick(both sides, top & bottom)... Since I have the dual cams more than likely, your spacers would be different( I'm guessing here), since you have the 'X' setup. I'm thinking again... that the spacers have to be right(width) in order to have the shooting string lined up with the riser?
Coop
I forgot..
I have a left handed bow..
Coop
coop,
all shoot thru systems have dual cams also.
Last edited by RogerSr; 08-24-2009 at 04:36 PM.
Senior Member
Yes...the spacers on either side of the cam on the inside of the limb fork should be the same width.Originally Posted by Coop
Thanks guys..
I appreciate the info..
Coop
Posting Permissions
Reply With Quote