Results 1 to 4 of 4

Thread: cheetah string suppressor/string wear

  1. #1
    1_led_zeppelin
    Guest

    Default cheetah string suppressor/string wear

    i have the cheetah and after shootin some arrows i notice that my string suppressor (sts) keeps comin loose.....got a couple ideas for it, thread lock (loctite) or putting another smaller spacer behind it with thread lock....any other ideas would be helpful....the last post i put up i had string wear on idler wheel so i served it and seems to be workin pretty good if anyone else is havin that problem

    trav

  2. #2
    Administrator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,327
    Post Thanks / Like

    Default

    Isn't there a set screw on the side of the riser? From what I've been reading some do and some don't. Which is yours? If yours doesn't have one I would highly recommend that you drill and tap it for one. I would say just glue it, but then you'd have no adjustability.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin/Rytera Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  3. #3
    1_led_zeppelin
    Guest

    Default set screw

    yeah it has a set screw that doesnt stay tight....i can tell when it gets loose cause my arrows dont fly straight, i can see them wobble in flight

    trav

  4. #4
    Administrator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,327
    Post Thanks / Like

    Default

    So use some #242 Loctite on the set screw. This usually comes in a little red tube and it's color is actually blue.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin/Rytera Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •