Results 1 to 4 of 4

Thread: Yet anouther Draw length question

  1. #1
    AlienX
    Guest

    Default Yet anouther Draw length question

    So after reading about changing draw length i desided it was time to made mine fit me blah blah blah ..... i changed 1 side and now i cant get one screw out of the other cam i twisted off 1 wrench and am working on the 2nd wrench anyone have anyideas on how to get it loose?

  2. #2
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,036
    Post Thanks / Like

    Default

    Sounds like it is screwed in with loctite. If so you can search for a solution - also produced by loctite - which will remove the 'glue'.
    Me myself would just ruin the next allen wrench...
    (2) Hoyt PCEXL

  3. #3
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,849
    Post Thanks / Like

    Default

    Heat will usally 'break' the grip of the locktite, not talking a lot of heat, just a bit. Tip of propane torch, a few seconds should do it. Be Carefull!
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  4. #4
    AlienX
    Guest

    Smile

    thanks Guys im gonna try a little heat hopefully i dont srew anything up lol

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •