Results 1 to 5 of 5

Thread: Very Loud 08 MOAB

  1. #1
    kattman
    Guest

    Default Very Loud 08 MOAB

    I have a 08 MOAB that is very loud and I cannot figure out why. I am new to Martin tuning. I have the ATA 32 3/4 and the BH is 7 3/8 BH. The draw is at 29. When I shoot it sounds like a firecracker from like 2 2x4s hitting each other flat.

    I need to know how to check cam timing on the M pro and any other suggestions. Seems like it is going through the CSS very loud. I have tried all the string stuff. I have put a very heavy stabilizers too and it helped very little. Right now I am stumped.

    Any help from any of the experts in here would be gratly appreciated.

    Thanks
    Kevin

  2. #2
    Dave308
    Guest

    Default

    Is your STS adjusted correctly? Should be about the thickness of a credit card away from you string. Also do you have limb savers on your limbs?

  3. #3
    kattman
    Guest

    Default Sts

    STS is correct and the factory limbsaver things are on the limbs.

    Any other thing to check?

  4. #4
    Dave308
    Guest

    Default

    If you hold your bow in one hand and hit it with other do you hear anything rattle, like e-clips, crews, sight, ect. ?

    Your arrow weight being low can also make it sound very loud. The closer to 5 grains per pound your shooting the louder it will be.

  5. #5
    Pa. Shooter
    Guest

    Default

    Kevin,

    I had the same problem with my sons bow.
    We took off the STS......noise was gone.
    You hear a little string twang as you shoot it, but have someone else shoot
    it, and walk 10 feet awy, it made a big difference for use.
    No more popping sound.

    Steve

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •