Cat cams cutting serving on my cables

[morgun]

Is there anything I can do about this to make it so it does not happen? I have a 09' Firecat. Is this a common problem?

[bfisher]

Contact customer service at Martin. They did have a problem with the cables rubbing the modules and wearing on the serving. I'm pretty sure they redesigned the modules and should replace those you have. Essentially, from what I can understand, they machined them 1/16" narrower to give clearance between the cable and the mod.

[ezbite]

i got the new thinner mods and also took a fine grit sandpaper(i think 340) and knocked the edge off the grove and everywhere else on the modules, then got a green dish scrubber (the green nylon on the back of a sponge) and really buffed them smooth. not more fraying.

[the-beagle]

Call martin. They sent new cams and modules in under a week.

[slayer73]

Thanks guys....i posted this under a guest name because I could not remember my password lol. I have emailed them and asked what they can do for me. Thanks again!

[bfisher]

Thanks guys....i posted this under a guest name because I could not remember my password lol. I have emailed them and asked what they can do for me. Thanks again!

Don't count on an email. Things are probably closed for the Xmas holiday, but make the phone call. It's more sure and quicker. 1-800-541-8902

[rjd]

Mine are doing the same thing chewed through the upper cam serving . Have got to call . Is there anyone who a person should ask for?

[bfisher]

Mine are doing the same thing chewed through the upper cam serving . Have got to call . Is there anyone who a person should ask for?

I have always dealt with Joel or Jeremy.

[rjd]

Thanks B" I'll be giving them a call on tuesday.

[slayer73]

they told me that I was supposed to bring it into a dealer to have it checked out.