Just bought a new 2008 (leftover) Slayer X with the M-Pro cam setup. How can I tell what limbs are on this bow?
Just bought a new 2008 (leftover) Slayer X with the M-Pro cam setup. How can I tell what limbs are on this bow?
13" Super Mag.
There will be a deflection # written on the edge at the limb butt.
5H, 3L, 7M, 4H, etc...
Also, can someone tell me what the difference would be on a 2008 Slayer X using the 13" Super Magnum limbs vs. the 14" Magnum limbs? Assume both would be using set up with the M-Pro cam...
Can't get into the spec charts for 2008, however it has specs similar to the 2009 Warthog so 3H should give you about 70#. As for th rest of the specs it's a guessing game. The Slayer was manufactured with Cat cams which are maybe going to give different specs than the M-pro. With the M-Pro it was most likely a custom order job.
The main difference you'll see with 14" limbs is about 2" longer ATA and taller brace height. Also, but just a guess, you'd have to use something like a 4H or 5H limb to get the same draw weight.
If You're Not Living on the Edge You're Taking Up Too Much Space
Martin/Rytera Staff Shooter
Alien Mafia
PSAA Life member, UBP Life member
PADI AOW Diver
The MPro cam is not the norm. most Slayer Xs came with C.A.T. cams with
14" limbs in 08
Bfisher, we were typing at the same time, so mine is out of order.
Is 3H the correct designation for the 13" Super Mag limbs? Also, does anyone know if there is an IBO speed rating on this configuration - 08' Slayer X with M-Pro and 13" Super Mag limbs?
If You're Not Living on the Edge You're Taking Up Too Much Space
Martin/Rytera Staff Shooter
Alien Mafia
PSAA Life member, UBP Life member
PADI AOW Diver
I have an older SlayR with 14" 5H limbs and the M-Pro cam. It is silky smooth and smokes them just fine! It is a 70# bow...hopes this helps.
'09 Warthog, QAD HD, Sword Centurian, Scott Sabretooth