Results 1 to 8 of 8

Thread: scepter4

  1. #1
    Junior Member
    Join Date
    Feb 2011
    Location
    australia
    Posts
    18
    Post Thanks / Like

    Question scepter4

    I have just bought a new( last years model ) septer4 mag with small furious cams and the module has a L stamped on it ( Large I think )string lengths are to spec 50.5 string and 39.25 cable and the max draw length is 26" on setting no 4 on the mods.It should go to 28" I want 27". that is why I bought this setup .ata is a1/ 4" long brace hight is 6 3/4":

  2. #2
    Senior Member
    Join Date
    Apr 2009
    Posts
    195
    Post Thanks / Like

    Default

    Try different number holes in modules you should have six diferent numbered holes one of them will give you the correct draw lenght take out both screws to get different settings each hole should move you by half an inch.

  3. #3
    Junior Member
    Join Date
    Feb 2011
    Location
    australia
    Posts
    18
    Post Thanks / Like

    Default

    done that! Its maxed out at 26"

  4. #4
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,034
    Post Thanks / Like

    Default

    Hm, weird.

    Even witht he medium Module the max draw should be around 27". Check ATA and BH for specs, check Cam timing and if on both cams is the same module..
    (2) Hoyt PCEXL

  5. #5
    Junior Member
    Join Date
    Feb 2011
    Location
    australia
    Posts
    18
    Post Thanks / Like

    Default

    yes i thuoght the same and ATA is 1/8" long --brace hight is 6 3/4 ---cam timing is spot on ----and screws are both in no 4 hole this why i am asking for help?

  6. #6
    Senior Member
    Join Date
    Apr 2009
    Posts
    195
    Post Thanks / Like

    Default

    are you changing the screws on both cams i think you have one of the screws in the wrong place and the module is not rotating correctly

  7. #7
    Senior Member
    Join Date
    Apr 2009
    Posts
    195
    Post Thanks / Like

    Default

    PM Sonny Thomas and he will walk you thru it

  8. #8
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,034
    Post Thanks / Like

    Default

    I wonder if you got any help?
    (2) Hoyt PCEXL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •