Results 1 to 2 of 2

Thread: string change help

  1. #1
    pscm
    Guest

    Default string change help

    Looking for assistance with putting a new string and cable on my martin moab.
    Do you check ata with limb bolts all the way tightened? Is cam lean a big problem to watch for? Also if twists are needed to get the ATA correct, should one twist both the cable and string?

    Thanks, in advance for the help.

  2. #2
    Member DeepRiverBowman's Avatar
    Join Date
    Jan 2010
    Location
    Indiana
    Posts
    67
    Post Thanks / Like

    Default

    I never worried much about ata and check it at the weight I'm shooting when I do check it. Cam lean is only an issue if your axles are bent or your cable guard is too far out. When changing string/cables, I would be more interested in brace height and tiller. It doesn't matter if you twist the string or the cables, both will work. Just remember that shortening the string will raise bh and lower dw; shortening the cables will do the opposite. Use limb bolts to set tiller.

    mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •