Results 1 to 2 of 2

Thread: 2010 Firecat out of spec

  1. #1

    Default 2010 Firecat out of spec

    I measured my new Firecat and found that the A to A is about 32 3/4" and the brace height is 6 3/4". Should I worry about getting it to spec and if so what is the best way to do it?

  2. #2
    Senior Member
    Join Date
    Sep 2009
    Tampa, FL
    Post Thanks / Like


    You need to put several twists in both cables to get the brace height right. Check your poundage once you get to 7". if its over max you will need to also twist your string up. This will increase your draw length so you may have to mover your module and stop to compensate. Do not try and get to the 32 1/4 ATA spec, per martin the TR2 is closer to 32 1/2 than 32 1/4.
    2010 Alien X
    353gr GT Velocity XT 400 @ 320fps
    370gr GT Velocity Hunter 300 @ 315fps
    Tru-Fire Hurricane Release
    NAP Apache Rest
    Black Gold AMP 3 pin sight
    Limbsaver stabilizer
    G5 Montec

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts