Results 1 to 10 of 10

Thread: firecat question

  1. #1
    edjack
    Guest

    Default firecat question

    i have 09 firecatbut with 2010 limbs and cat2 cams. what would be the ata and bh specs. thanks for any info

  2. #2
    Administrator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,359
    Post Thanks / Like

    Default

    Should be the same as for 2010 specs or close to it. I have a 2008 withe the same setup and I can honestly say I've never measured it. I don't really care what it measures. I set it up to shoot the way I like and let the specs fall where they may.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  3. #3
    Senior Member
    Join Date
    Sep 2009
    Location
    Tampa, FL
    Posts
    154
    Post Thanks / Like

    Default

    edjack,
    BH should be 7" and ATA is closer to 32 1/2" than the specs that say 32 1/4".
    2010 Alien X
    29"/70#
    353gr GT Velocity XT 400 @ 320fps
    370gr GT Velocity Hunter 300 @ 315fps
    Tru-Fire Hurricane Release
    NAP Apache Rest
    Black Gold AMP 3 pin sight
    Limbsaver stabilizer
    G5 Montec

  4. #4
    edjack
    Guest

    Default

    thanks everyone

  5. #5
    tood s
    Guest

    Default

    do you measure the ATA & BH with the limbs cranked all the way down? i wanna check my cables to see how much twisting i have to do to wrap the cams. so im guessing that i have to crank it down to check all this before i turn the limb bolts out to start wrapping.

  6. #6
    Coop
    Guest

    Default Yes.

    Crank all the way..than measure.

    Coop

  7. #7
    tood s
    Guest

    Default

    thanks alot

  8. #8
    Banned
    Join Date
    Jan 2010
    Location
    Nevada
    Posts
    42
    Post Thanks / Like

    Default center?

    Ao you meansure the ATA at the center of the cams while cranked?

  9. #9
    Administrator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,359
    Post Thanks / Like

    Default

    Quote Originally Posted by bb11 View Post
    Ao you meansure the ATA at the center of the cams while cranked?
    A2A is measured from center of axle to center of axle. If you are using a metal tape measure you can measure from the outside of one axle to the inside of the other. Either way you'll get the same measurement.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  10. #10
    Banned
    Join Date
    Jan 2010
    Location
    Nevada
    Posts
    42
    Post Thanks / Like

    Default

    thanks bfisher!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •