Missing thread AGAIN!

[Destroyer]

Actually one of the threads helped a bit. My M-pro measures 9/32" from the inside of the string to the end of the cam groove. Or about 1/2" measuring the groove itself. Would be good if there was some official instructions though.

Don't overthink things. Save the brain power for concentrating on shooting form and shot execution.

This was the bit that helped.

[Sagittarius]

My 09 Bengal is 3/8 from inside of string @90deg to top of the cam groove- 5/8 along cam groove, BH 6 15/16 and A2A 32 3/8 C2C If I do anything to get it to 1/2 along the cam groove won't it screw up the other specs??? It shoots well and is quiet.... (although I am a partially deaf old fart!!!) I think I just answered my own question????

[bfisher]

Guys, you're over thinking again. Specs are just close approximations of what the company has found to work the best. Close is close in most cases. A2A can vary 1/8" as can brace height. Cam orientation is another matter. If the cam is over rotated on many bows it causes excess vibration and it's resultant noise.

Get the specs close then make sure the cam orientation is close. If you have 1/2" of cam groove showing that's fine. If you need a little more then twist the string some. 9/16" isn't going to hurt. Let the other specs fall where they may.

Tune the bow and enjoy shooting it. In time the strings are going to creep a bit and it'll change the specs anyway. Just relax and try to have some fun.

Barry

[Destroyer]

Guys, you're over thinking again.

Only know one way too fix that. Now where is that bottle of Bourbon.............

[Sagittarius]

WOW ! Thats the first time i've been accused of that ??? I don't think i've got the mental capacity to over think... LOL