Results 1 to 3 of 3

Thread: martin sabre

  1. #1
    newarcher
    Guest

    Default martin sabre

    I have a martin sabre which says it;s maxed out at 50lbs - it was assembled by Steve Papp - let off says H - split 36 - I have no idea what these mean but is there any way to increase the draw weight?

  2. #2
    Elk4Me2
    Guest

    Default

    You may have a 50# limb set. I have an 06 Saber and mine goes to 70#
    the Split is split cable and 36" s the legnth of your cable and string legnth is 88".The H is high let off prob 75%. I would call the dealer you got your bow from . If that dosent work Pm JoelC here or Josh, or Pug. bye the way I am Elk4me on this site my pasword will not go thru or I cant get it to resend it to me.

    Hope this helps

  3. #3
    hunter
    Guest

    Default

    You would need new limbs .. if it was made to max out at 50lbs ...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •