Results 1 to 7 of 7

Thread: Old bow - draw module help

  1. #1
    JasonLP99
    Guest

    Default Old bow - draw module help

    Hello Folks, I am a first time poster and new to archery. I'm hoping someone might be able to help me. I picked up an older Martin bow, I don't know much about it, all the info on the tag has worn off but I was told by some folks at Cabelas, the bow is likely from 1998-2000.
    I am looking for draw length modules, the bow has Z cams (HL) with 5X modules. I am looking to shorten up the draw 2-3 inches. I was able to find 4X modules on eBay, but that wasn't enough, which I kind of expected. I think I am going to need to go with 2X or 3X modules but I haven't been able to track any down. I spoke with Martin and I was told they no longer carry them.
    If anyone has any modules they would like to part with I would greatly appreciate it! I also posted some pics of the bow, if anyone can shed some light on what I might have I would appreciate that as well!
    Thanks,
    Jason
    Attached Images Attached Images

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,552
    Post Thanks / Like

    Default

    Did you try posting this same thing on www.archerytalk.com? You'll likely get more responses.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  3. #3
    Senior Member
    Join Date
    May 2009
    Location
    Colorado
    Posts
    1,698
    Post Thanks / Like

    Default

    Looks like and older Jaguar. Lemme dig up my old catalogs, I may be able to give you the specs.
    I do have a few old X mods left but, all too long for you...

  4. #4
    Senior Member
    Join Date
    May 2009
    Location
    Colorado
    Posts
    1,698
    Post Thanks / Like

    Default

    Quote Originally Posted by Spiker View Post
    Looks like and older Jaguar. Lemme dig up my old catalogs, I may be able to give you the specs.
    I do have a few old X mods left but, all too long for you...
    P.S. - what is the axle to axle measurement on it?

  5. #5
    JasonLP99
    Guest

    Default

    Axel to axel is 39". I haven't tried archerytalk, never been there, I'll check it out. Thanks!

  6. #6
    Roc
    Guest

    Default 2x and 3x module

    Check your pm . I have the modules you need

  7. #7
    JasonLP99
    Guest

    Default

    Thanks Roc! I sent you an email.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •