new Pro-x firecat

[duffy]

i have been using martin compounds over the past 6 months, and i have used some peoples bows - bengal, cheetah, tr2 and the moab i have decided on the firecat pro-x.

i have bought a 2nd martin bow and heard that if i wanted to get more consistency in my shooting I should get the same bow, so now i own 2 pro-x.

have i made the right choice as people within the club i belong have different compounds but not of the same bow!

i shoot field 3d targets, bowhunter

any advice/comments appreciated

[Montalaar]

It is true that it is much more easier for you if both bows you own are the same. I always have two same bows just as a backup. Shooting differenct Compounds can be fun but might have an influence on your shooting as you have to deal with different riser geometries, ATA and so on.

[bfisher]

I'd have to ask just how serious you are about competing in field archery. I've been that route many years ago. I also have a FireCat so can make a pretty objective opinion about this.

IMO, the FireCat with all it's virtues as a hunting/3D bow is not the choice I would make for field or serious 3D competition. The A2A is too short and the reflex of the riser allows for too much possibility of torque. Plus, for field you are shooting a known distance where speed is not necessary so I would want a smoother dual cam setup.

From a personal stand point I shoot around a 26.5" draw length so speed isn't something I'm going to get anyway so I don't worry about it. I also have an ability to, most of the time, be able to judge yardage fairly well. But even with my short draw I like a longer A2A bow just for it's better handling and aiming qualities. Something 36" or more. That leaves me with only a few choices in the Martin/Rytera lineup. So my obvious choice this year was an Alien Z with Hybrix 1.5 cams.

Being as I don't hunt any more I have little use for a short A2A bow. In fact, having shot one for a couple years now I still don't care for them. I quit on the idea of having an identical backup bow a few years ago. I rather like the idea of different bows for different venues. I don't mind the FireCat as a hunting bow where extreme accuracy is not totally necessary, but I like the way the Alien Z shoots a whole lot better for me.

I'm also not a big fan of single cam bows. I've shot them for nearly 10 years. Dual cams for 25 years prior. I like the dualies better. More adjustability all round. Besides, I can shoot about 8# less draw weight to get the same speed as the bows with single cams (Martins that is).

OK, a long dissertation from me to say a lot of nothing.

[duffy]

I'd have to ask just how serious you are about competing in field archery. I've been that route many years ago. I also have a FireCat so can make a pretty objective opinion about this.

IMO, the FireCat with all it's virtues as a hunting/3D bow is not the choice I would make for field or serious 3D competition. The A2A is too short and the reflex of the riser allows for too much possibility of torque. Plus, for field you are shooting a known distance where speed is not necessary so I would want a smoother dual cam setup.

From a personal stand point I shoot around a 26.5" draw length so speed isn't something I'm going to get anyway so I don't worry about it. I also have an ability to, most of the time, be able to judge yardage fairly well. But even with my short draw I like a longer A2A bow just for it's better handling and aiming qualities. Something 36" or more. That leaves me with only a few choices in the Martin/Rytera lineup. So my obvious choice this year was an Alien Z with Hybrix 1.5 cams.

Being as I don't hunt any more I have little use for a short A2A bow. In fact, having shot one for a couple years now I still don't care for them. I quit on the idea of having an identical backup bow a few years ago. I rather like the idea of different bows for different venues. I don't mind the FireCat as a hunting bow where extreme accuracy is not totally necessary, but I like the way the Alien Z shoots a whole lot better for me.

I'm also not a big fan of single cam bows. I've shot them for nearly 10 years. Dual cams for 25 years prior. I like the dualies better. More adjustability all round. Besides, I can shoot about 8# less draw weight to get the same speed as the bows with single cams (Martins that is).

OK, a long dissertation from me to say a lot of nothing.

thanks for your reply b fisher

I am aware the firecat pro-x is a short a2a, but it was the bow out of all of them that felt good to me when i shot it, the 3d animal targets i shoot at are at unmarked distances ranging from 25-60 yards, some 3d animals shorter or longer depending on size. i myself have a 27" dl. my bows are 45-60lb so i know i can shoot 60lb with the agressive cams rather than go heavier in the bow to achieve the same speeds and i dont want to go heavier than 60lb.

so the duo cams arent dual cams (dual cams are where you have to have them in time at the same points)?

i have been doing archery for just under a year now and have finally settled on what i want to shoot and when from now on. (all i have done in this 1st year is constantly increase my poundage and change bows i started on a 20lb bow, now shoot wooden bows at 55lb and compounds at 60lb) my idea is. i will shoot compound bowhunter instinctive (off the fingers, people have different meanings for bowhunter in different parts of the world) for about half of the year, the other half of the year i will be shooting instinctive traditional, with border archery bows 2 takedowns and one 1piece. with the wooden bows i have also gone for same poundage and same height bows to again help me with becoming more consistent.

not sure how far i want to take my archery, but with what i said above about what bows i am now starting to use i hope i can start to beat other people at my club with plenty of practice to be put in.

[bfisher]

Well Duffy, you have your own ideas and agenda and I'll certainly not criticise you for it. Heck, at least you have some idea of what you want.

I'm also aware that the Cat cams are not a dualie, but binary. I guess I have a tendency to refer to them as duals simply because they aren't single cams.

As such, my post was just for informational purposes. Something to maybe use in the future. I'm sure you certainly aren't going to go out and drop a big wad of bills for a longer A2A bow just on my say-so.

You have fun with your archery. And feel free to join in any threads that interest you. We get along pretty well on this site. Always lots of ideas floating around.

[SonnyThomas]

I think you missed the point of what your shootin' buddies tried to get forth. The said general rule is one bow for paper targets and one bow for 3D. Having the same bow in a rather moot point.

I believe bfisher pretty much laid it on the line. The man is really good and you more or less blew him off.

As you can tell I'm not overly shy and laid back. I willing to bet if you stay in archery and really want to get serious, your "finally settled on what i want to shoot and when from now on" is going to change.

Finally, get a good target/3D magazine and look at the bows in the winner's circle. They ain't short by a long shot (no pun intended).