Results 1 to 5 of 5

Thread: Rytera bullet X

  1. #1
    rcher54
    Guest

    Default Rytera bullet X

    Is it possible to make my 2006 bullet x into a one cam and if so what cams and what specs on sting/cable??

  2. #2
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,007
    Post Thanks / Like

    Default

    Yes it is. You could use the original MPro-Cam that has always been used on the Bullet-X or try out the actual Rytera-Singlecam.

    I am sure that someone here will be able to help you.
    (2) Hoyt PCEXL

  3. #3
    Member
    Join Date
    Feb 2008
    Location
    SW Minn
    Posts
    59
    Post Thanks / Like

    Thumbs up

    Actually thr rytera bullet x used a Vipro cam on the single cam version it is the same as a Mpro cam that the martins used. If you have nitrious 2 cams on your bullet I might be interested in trading the single cam, Idle wheel and strings and cables for your setup..

  4. #4
    Senior Member
    Join Date
    Dec 2009
    Posts
    309
    Post Thanks / Like

    Default

    Yes, you can.

    I have both L/H and R/H Vipro cams/idlers, that I will willingly swap 1 for 1, for a set of Nitrous C's or B's.

    If you have C cams, the Vipro will drop about 5 Lbs from your max DW. If you have B cams, the Vipro will drop 10 Lbs.

  5. #5
    rcher54
    Guest

    Default rytera bullet x

    Thanks for the response guys. I already have a trade lined up, but thanks for the info! rcher54

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •