Results 1 to 3 of 3

Thread: Scepter IV

  1. #1
    Senior Member
    Join Date
    Oct 2005
    Location
    Azle, Texas
    Posts
    112
    Post Thanks / Like

    Default Scepter IV

    I bought a 2009 Scepter IV on ebay with the Furious X shootthrough system. If I don't like the X system what do I need to convert it to a cable guard system besides a cable rod and a pair of split cables? Do I have to buy new shorter axles and spacers?

    I shoot Fingers.

    Robert
    May All Of Your Arrows Find The Bulls Eye-MSMFSL
    NRA Life Member
    NFAA Member
    Martin Proud
    Scepter IV Elite w/Furious X Cams

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,588
    Post Thanks / Like

    Default

    Nope, nothing else to get. You could put the shorter axle kit in it, but it won't hurt anything as is. In fact you don't even have to remove the X modules. Just change the cables and put in the rod/slide and you're ready to rock. Of course you get some sideways torque so at least checking the tune is a given.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  3. #3
    Senior Member
    Join Date
    Oct 2005
    Location
    Azle, Texas
    Posts
    112
    Post Thanks / Like

    Default

    Thanks, I don't know much about the Furious cams. I have Fury cams and Nitrous cams. If I don't like the shoot thru may install a set of 000 65% let-off Fury cams. The chart says that they will give me my 26" AMO draw that I need.

    Robert
    Last edited by Robert58; 07-08-2010 at 03:01 PM.
    May All Of Your Arrows Find The Bulls Eye-MSMFSL
    NRA Life Member
    NFAA Member
    Martin Proud
    Scepter IV Elite w/Furious X Cams

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •