Results 1 to 3 of 3

Thread: bearings for old fury cams

  1. #1
    Unregistered
    Guest

    Default bearings for old fury cams

    can the bushings in older fury cams be replaced with the new speed bearings

  2. #2
    Junior Member
    Join Date
    Mar 2009
    Posts
    6
    Post Thanks / Like

    Default

    Even if they can't, check this out. I'm sure they have the bearings you'd need. They are excellent bearings too.

    http://www.bocabearings.com/

  3. #3
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,621
    Post Thanks / Like

    Default

    I have never shot a bow with the Fury cams, but other bows that used bushings. My experience is that bearings have a much larger outside diameter than bushings so won't fit. It's possible I'm wrong about the Fury cam but a call to sustomer service should get you the info you need.

    I know the Furious cams use bushings so if yours are worn it's quite possible that they have replacements for your cam. Might even be the same bushings.

    I've changed a few in my time and they are usually just a press-in fit. Pretty easy, really.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •