Results 1 to 2 of 2

Thread: accident with Martin Shadowcat

  1. #1
    Junior Member
    Join Date
    May 2010
    Location
    France (seine et marne)
    Posts
    19
    Post Thanks / Like

    Default accident with Martin Shadowcat

    accident with Martin Shadowcat bought in July, 2010

    During a shooting a notch broke what is equivalent to one shoot the visette at space left (I found it no problem of it quoted) not too much visible damage If it is not dopes it of the bottom on which an aluminium end left when the rope went out I put back in place the rope in priori no problem either of quotation of this one I made some shoot after this at air to go
    reponse of the archerie
    In my previous answer, I had already explained circumstances to the importer. Taking care is not possible in that case, fault is not due to the arch but to the faulty arrow (control your arrows before every shooting).

    If one is possible make nothing on your pulley, it will be necessary to order it, the cost of a pulley + hand - of work: 90,00 ttc
    Attached Images Attached Images
    Last edited by joelc; 09-02-2010 at 07:10 AM.

  2. #2
    Senior Member alex's Avatar
    Join Date
    Nov 2008
    Location
    Bulgaria
    Posts
    1,366
    Post Thanks / Like

    Default

    I'm afraid i didn't understand every detail of your post, but if you can't buy new cams you can fix the broken one. You can either polish the broken place with a sandpaper or try to put a couple of layers of epoxy somehow. Good luck!
    2008 Martin MOAB - 45-60#, set at about 51-53# / 55#" Perfect Line" compound/ 55# Mongol horsebow/ 45# "Perfect Line" takedown recurve/ 45# Bearpaw Grizzly hunter recurve/ 55# Samick Longbow Cheetah ... and several homemade bows

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •