Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: Setting draw length on shadowcat

  1. #1
    Senior Member
    Join Date
    Nov 2010
    Location
    Indiana
    Posts
    357
    Post Thanks / Like

    Default Setting draw length on shadowcat

    I need to adjust the modules on the 2010 Shadowcat. I cannot find any reference marks on the modules that would indicate the draw length. My bowtechs have numbers that correspond to the draw length setting but I can find no such marks on the Martin.

    Help please!

  2. #2
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,007
    Post Thanks / Like

    Default

    You modules should have numbers ranging from 1 to 7. 1 is the shortest possible setting, 7 the longest.
    (2) Hoyt PCEXL

  3. #3
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,007
    Post Thanks / Like

    Default

    Oh, you found my answer not helpful.. Well.. me neither....

    Look at this. Here you can see where #1 and #7 are.

    http://www.martinarchery.com/manuals...e_settings.pdf
    (2) Hoyt PCEXL

  4. #4
    Senior Member
    Join Date
    Nov 2010
    Location
    Indiana
    Posts
    357
    Post Thanks / Like

    Default

    Sorry I didn't respond immediately but I was out of town.

    I can't find any numbers on the modules. Is it possible that the previous owner could have switched the top module with the bottom module some way?

    Confusing.

  5. #5
    SonnyThomas
    Guest

    Default

    Quote Originally Posted by CarlosII View Post
    Sorry I didn't respond immediately but I was out of town.
    I can't find any numbers on the modules. Is it possible that the previous owner could have switched the top module with the bottom module some way?
    Confusing.
    Carlosii, I don't see how. My mods have a ridge on the side showing and flat for the side against the cam. If in doubt pull the 2 screws and check.
    I suspose the previous owner could have scrubbed the numbers off, but dang... My mods are numbered in bright white.

  6. #6
    Senior Member
    Join Date
    Nov 2010
    Location
    Indiana
    Posts
    357
    Post Thanks / Like

    Default

    Sonny,
    I thought they should have some highlight of some kind but not on this one. I took it up to Girts and the tech there, who also shoots a Shadowcat was dumbfounded to not to be able to find any marks on it.

    I think I'll give a call to Martin and see what they can tell me. I would think any draw mods from any manufacturer should have such marks. Can't imagine he made his own mods...but cha never know, right?

    dang its cold out there this morning...to heck with muzzleloader season...i'm stayin' inside.

  7. #7
    SonnyThomas
    Guest

    Default Setting draw length on shadowcat

    Yes, cold here to. I thought about going out bow hunting. 14 degrees had me roll over and go back to sleep. Might go out this afternoon. Suppose to get up to a blazing 25 degrees.

  8. #8
    Senior Member
    Join Date
    May 2009
    Location
    Colorado
    Posts
    1,695
    Post Thanks / Like

    Default

    Take a white Sharpie and mark your modules...
    This is the bottom cam set on #4.

  9. #9
    NeilM
    Guest

    Default

    I think you can pretty much work it out from Spikers photo. 1 is the shortest draw and 7 the longest (that's me). Just make sure you have both modules set to the same hole.

    Very strange that yours have no marking though.

  10. #10
    Senior Member
    Join Date
    May 2009
    Location
    Colorado
    Posts
    1,695
    Post Thanks / Like

    Default

    I think on the '10 Shadowcat it's:
    1= 27"
    2= 27.5"
    3= 28"
    4= 28.5"
    5= 29"
    6= 29.5"
    7= 30"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •