Barry, I use the peep to center the sight frame in, then place the pin on target. It used to be that I had a very nice, clear, crisp hole(peep) when I looked through it, then kinda let it fade to blurry as I focused on the target. Now, at full draw, the peep is always blurry. Changing the focal point to the target, I virtually lose the peep altogether. I know I'm still on with a good solid anchor, but I'm used to being able to see the peep clearly when I draw back.
If You're Not Living on the Edge You're Taking Up Too Much Space
Martin Gold Plus Staff Shooter
PSAA Life member, UBP Life member
PADI AOW Diver
THis might be worth a try, I was just reading about it yesterday.
Nite Hawk Peep
Anyone use a rear mounted (peepless) setup with 2011 Martins, or have an opinion whether it can or can work with the TRG? What if the TRG was moved down to lower on the riser? Possible?
Thanks archerx7. Any other thoughts on Eliminating the peep with compatibility with the TRG/SOS?
I tried to move the TRG//SOS to the lower slot in the riser. Doesn't work on the FC400. The lower riser slot is too thin and not deep enough.
I took a look at that peep, and made a very simplified version out of electrical tape. Stuck that on my peep, and tried it. Definitely might have some possibilities. Thanks for the tip!
Advantage Custom Strings