I have a 2010 Martin Saber for which I bought the STS to upgrade the bow (part 8897). The thing does not fit in the hole that was drilled for this thing. Any suggestions?
Can't install Martin STS on Saber
I have a 2010 Martin Saber for which I bought the STS to upgrade the bow (part 8897). The thing does not fit in the hole that was drilled for this thing. Any suggestions?
Senior Member
Most likely there's some of the camo inside the hole. Clean it carefully with a proper sized drill bit and it'll be ok.
2008 Martin MOAB - 45-60#, set at about 51-53# / 55#" Perfect Line" compound/ 55# Mongol horsebow/ 45# "Perfect Line" takedown recurve/ 45# Bearpaw Grizzly hunter recurve/ 55# Samick Longbow Cheetah ... and several homemade bows
Administrator
Yep, drill bit can work. Or a reamer. 3/8" diameter.
If You're Not Living on the Edge You're Taking Up Too Much Space
Martin/Rytera Staff Shooter
Alien Mafia
PSAA Life member, UBP Life member
PADI AOW Diver
Senior Member
Even sandpaper wraped around a dowel will remove enough of the camo dip to allow the rod to slide into place.
http://eastoutfitter.tripod.com/index.html
http://cascadianbowmen.com/
Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, tapered POC, Zwickey 'Eskimo' 2 blade
Posting Permissions
Reply With Quote