I've always understood that the measurement for the brace height was from the deepest part of the grip to the bow string.
The axle to axle is measured from the center of the cam axle to the center of the opposite cam axle.
My Shadowcat measures about 1/8 inch long on the axle to axle which is listed as 41.25 in the current catalog. The brace height measures 7 and 3/8 inches from the deepest part of the grip and the catalog lists the brace height as 7.75 inches.
First question regarding the axle to axle, is the 1/8 inch enough to be concerned with?
Second question regarding the brace height, is the 3/8 inch difference enough to be concerned with?
If the answers are yes to these questions, do I address the axle to axle by twisting the string or the cables? I guess the same would apply to the brace height; string or cables.
While I am an old geezer, my experience is very limited so I have to post these questions. Thanks for any help.