Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: 2011 Martins

  1. #1
    Junior Member
    Join Date
    Jan 2011
    Posts
    18
    Post Thanks / Like

    Default 2011 Martins

    Few questions for the knowledged.. How many pounds are the firecat 400 or any bows 70# limbs good for 70-75 per say and at what point do u quit losing power in poundage by twisting the cables??? Next are the cams on the firecat supposed to be leaning if i look down the bow from end to end their leaning to the left (right hand bow)..

  2. #2
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,758
    Post Thanks / Like

    Default

    Quote Originally Posted by sway View Post
    Few questions for the knowledged.. How many pounds are the firecat 400 or any bows 70# limbs good for 70-75 per say and at what point do u quit losing power in poundage by twisting the cables??? Next are the cams on the firecat supposed to be leaning if i look down the bow from end to end their leaning to the left (right hand bow)..
    Its not safe to excede the factory preload as it puts undue stress on the limbs, often resulting limb failure ( Stress cracks at the forks ). If your Firecat is a 70 # and is peaking at 73 #, I would'nt put any more preload on the limbs. As for your cams leaning to the left , some of that is normal on a bow with a cable slide rod, as long as the string isn't trying to climb out of the string grove of the cam. They should be pretty straight, but thats difficult on a short a2a bow like your 32.5 A2A bow, thats an acute angle that the cables are being pulled to, gets even steeper as you come to full draw, and for that reason it is hard to eliminate all of the lean. But if it is excesive, add a few twist to the right side of the cable yoke, top and bottom, just try to keep the string in the middle of the grove.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  3. #3
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,545
    Post Thanks / Like

    Default

    Elkslayer, if I'm correct the FireCat 400 has binary cams (slaved to each other) so there is no cable yoke to twist to eliminate cam lean. So what you have is whatyou're stuck with. My answer would be if it is too severe then a trip back to the dealer would be in order. Let him look at it and maybe new limbs are in order. I do agree that there is always some lean with any bow here the cables are pulled to the side. However, with the TRG system the lean should even out at full draw. That's what it's supposed to do in the first place.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  4. #4
    Senior Member Ehunter's Avatar
    Join Date
    Mar 2010
    Location
    Southeast Kansas
    Posts
    1,754
    Post Thanks / Like

    Default

    Wouldn't having the cables twisted up to exceed the maximum listed draw weight also cause a bit of cam lean? Afterall, you are shortening the ATA even further by doing that. I would set the bow at 70# if it's a 70#'er, and work on tuning and cam timing to get the most speed out of the bow. One thing you can do by twisting cables too much is overrotate the cams, and cause a lock-up. You'll come to full draw, and the cams will lock in place. Expect some repair work associated with that. lol

  5. #5
    Junior Member
    Join Date
    Jan 2011
    Posts
    18
    Post Thanks / Like

    Default

    Thanks for the input went to the dealer today and got her ligned out he explained all that greek talk to me im just a little new to the whole thing anyway but thanks for the answers....

  6. #6
    ramil555
    Guest

    Default Plumber London | South London Plumber | Emergency Plumbers London | Gas Safe Plumbers

    Hi there good friends, my name is Ramil and I am brand new to this community. I have been just checking around on the net yesterday and came across to this web-site. After browsing for sometimes I found out I had to become a member on this site. Here's a little bit of facts about myself. I love Surfing the net, Chatting, Reading Books, Online Gaming, Watching Movies, Sports like Basketball and Badminton and there so many other to mention. Anyway, thanks for browsing by my profile and always looking forward to talking with new friends like you. Have a nice day ahead!

    Plumber London | South London Plumber | Emergency Plumbers London | Gas Safe Plumbers

    plumber London
    South London plumber
    emergency plumbers London
    Gas Safe plumbers

    Plumbing and heating services in south London. We offer new boiler installations, mega flow, underfloor heating, bathrooms, boiler repairs and servicing. We also offer emergency plumbing services. Reliable and competitive.

  7. #7
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,758
    Post Thanks / Like

    Default

    Certainly know who to call when in need of plumbing help while in London. Thank you for that.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  8. #8
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,755
    Post Thanks / Like

    Default

    I don't know about you but my plumbing works. Can we use a plunger on him, or is there away to flush him down the drain.

    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  9. #9
    Senior Member ElkSlayer's Avatar
    Join Date
    Feb 2010
    Location
    Oregon
    Posts
    1,031
    Post Thanks / Like

    Default

    may need a pump truck! that's alot of......spam
    It's all fun an games till you put that big boy on the ground.. now its time to get to work
    Martin cougarIII elite nitrous C cam X system & HHA
    Darton Fury recurve

    http://www.cascadianbowmen.org/

  10. #10
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,758
    Post Thanks / Like

    Default

    Quote Originally Posted by ElkSlayer View Post
    may need a pump truck! that's alot of......spam
    Pretty close, its a lot of........... well it does have four letters, and remember it may be crap to us, but it's his bread and butter !
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •