Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Rytera Archery

  1. #1
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,563
    Post Thanks / Like

    Default Rytera Archery

    2011 Rytera website is up and running
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,563
    Post Thanks / Like

    Default

    Hey guys, I'm planning on getting a Nemsis this year and ordering soon. The website shows that I can order it with a CCS or conventional cable guard/slide. Which way would you guys go, given the choice?

    I know the CCS on my Z pulled the cables much farther to the side than necessary so I shimmed it to angle toward the string more. Just wondering how the rod/slide would be configured. Also wondering why they don't have the TRG/SOS. Hmmmm! Maybe it's time to make another call to Martin and find out.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  3. #3
    Super Moderator Arrow Splitter's Avatar
    Join Date
    Oct 2010
    Location
    Gilmanton, NH, United States
    Posts
    3,816
    Post Thanks / Like

    Default

    Quote Originally Posted by bfisher View Post
    2011 Rytera website is up and running
    Nice! I'll have to look at it after I shovel the snow off the porch.
    2011 Martin Firecat 400/NAP Apache Dropaway/Truglo Xtreme Sight/Custom 8" Stabilizer/Victory V6 Arrows
    2007 Martin Jaguar /Trophy Taker Dropaway/Extreme Sight/Custom 21" Stabilizer/Victory V6 Arrows
    Bow String Depot, Custom String Builders email us @ bowstringdepot@gmail.com

  4. #4
    Senior Member
    Join Date
    Jan 2011
    Location
    SW OK
    Posts
    1,527
    Post Thanks / Like

    Default

    Quote Originally Posted by bfisher View Post
    Also wondering why they don't have the TRG/SOS. Hmmmm! Maybe it's time to make another call to Martin and find out.
    Enquiring minds want to know!
    Firecat 400

  5. #5
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,004
    Post Thanks / Like

    Default

    Take the slide. Just better in terms of tunability.

    TRG/SOS has a smaller rod as has been found out by someone here. I think it wont fit in the larger holes made for the Rod/CCS. Maybe there have been so many risers left from 2010 that they could not change that for 2011.
    (2) Hoyt PCEXL

  6. #6
    SonnyThomas
    Guest

    Default Rytera Archery

    I'm a sort of conventional sort of guy as long as the guide rod is offset so it can be adjusted.

    As for the TRG, I don't know. On the Martins the hole is not centered to the riser. It's off to the side to the point the hole is open to full depth. And the test of time begins.
    Last edited by SonnyThomas; 01-19-2011 at 11:00 AM.

  7. #7
    Senior Member
    Join Date
    May 2009
    Location
    Colorado
    Posts
    1,700
    Post Thanks / Like

    Default

    I think that is a mistake on the website store.
    There is no way to mount a CCS on the Nemesis unless they came up with a whole new setup.

  8. #8
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    6,082
    Post Thanks / Like

    Default

    Take the slide/rod!

    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  9. #9
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,563
    Post Thanks / Like

    Default

    OK, rod/slide it is. The rod is not offset as far as I know. It's the straight carbon rod, but it wouldn't be much of a problem to order it with the offset rod. That would definitely allow for more adjustment on my part in getting just enough fletching clearance and eliminating as much side torque as possible.

    Now for the color. I'm going to just go ahead and order a black riser and carbon limbs. This will give me more options for string color. I am seriously thinking of the pink and purple. Not only would it be different, but it would be me not being a hypocrite. I do keep suggesting it to others you know. There's one thing about strings. They can always be changed.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  10. #10
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,004
    Post Thanks / Like

    Default

    I would make myself pink/pruple strings. But i would have to spend around 100 for material and that is not worth it. :P
    (2) Hoyt PCEXL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •