Results 1 to 10 of 21

Thread: Who's ready to hit the trails

Hybrid View

  1. #1
    Senior Member ElkSlayer's Avatar
    Join Date
    Feb 2010
    Location
    Oregon
    Posts
    1,031
    Post Thanks / Like

    Cool Who's ready to hit the trails

    spring is coming, yea it may not look like it but sure as the sun rises it will be here.. I am itching to get to the range, hit some trails. shoot some field rounds & a animal round... take all the kids an have a blast.
    Any body else ready to go...
    I will be hooking that new BT release to my bow for the first time today, (Just cant resist it any longer) so i can re- tune any thing thats out of wack from the switch to the new toy.. Got to kill some Foam. come on 3 D shoots start up already
    It's all fun an games till you put that big boy on the ground.. now its time to get to work
    Martin cougarIII elite nitrous C cam X system & HHA
    Darton Fury recurve

    http://www.cascadianbowmen.org/

  2. #2
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,755
    Post Thanks / Like

    Default

    Our Martin dealer has 110 acres of fun year round. He had a outdoor 3d target range with 30 targets, we use to shoot at. He had to cut it down to 15 targets after the floods. When we did the 30 targets it was an all day bring your lunch day. But it was a great time. Even now that it is only 15 targets it still is fun. This year when as you said spring arrives I'll have my 3 kids and myself going can't wait.

    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  3. #3
    Senior Member ElkSlayer's Avatar
    Join Date
    Feb 2010
    Location
    Oregon
    Posts
    1,031
    Post Thanks / Like

    Default

    With that snow you were having it might take it a bit longer to arrive.. Us on the other hand, had 60* sun shine two days in a row...lol
    So some guy got ahold of my bow and moved my peep an kisser..shortend the DL too Oh wait I did all That when i hooked on with The TRU Ball.. OH my is all i have to say...yea right, I never shut up.
    Other then the obvious, peep / DL ajustment. It went well. need you all to stop by and make sure My form is solid..lol Takes a bit for the shot to happen but most of the first session with bow it was a suprize shot.
    It's all fun an games till you put that big boy on the ground.. now its time to get to work
    Martin cougarIII elite nitrous C cam X system & HHA
    Darton Fury recurve

    http://www.cascadianbowmen.org/

  4. #4
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,762
    Post Thanks / Like

    Default

    No wonder I never saw your post, probably had to dust this place out. Was that an echo? You where correct, it is my accelerated dial-up that x's out the pic, the pita So much activity arouond this board that a post I made back in Oct. is in the 4th thread down!
    Last edited by elkslayer4x5; 01-25-2011 at 02:48 PM.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  5. #5
    Senior Member ElkSlayer's Avatar
    Join Date
    Feb 2010
    Location
    Oregon
    Posts
    1,031
    Post Thanks / Like

    Default

    Having a nice place to shoot is always a huge plus. We have 53 acres our club owns. Indoor range with 20yd lanes. pratice range has huge inverted V of target butts 20 -60 on right side, and 25 - 65 on left... to the far left is a 100+ lane that has huge stack of ceader bails, markers 100-70.
    Top that off with 4 trails 14 ends each... talk about making a day of it ..takes us a hour to get there. so we spend 4-5 hours every time we go.. good thing they have a camp ground. that way a day can turn into a weekend any body up for a round or two I should be soon..if not guess the kids can have a blast whoopin on me.. This time..

    http://www.cascadianbowmen.com/
    It's all fun an games till you put that big boy on the ground.. now its time to get to work
    Martin cougarIII elite nitrous C cam X system & HHA
    Darton Fury recurve

    http://www.cascadianbowmen.org/

  6. #6
    Senior Member ElkSlayer's Avatar
    Join Date
    Feb 2010
    Location
    Oregon
    Posts
    1,031
    Post Thanks / Like

    Default

    Well then post up...lol should be time to bust out all the bags and get um hung back up at your place...after you do more triming of course on them trails.
    It's all fun an games till you put that big boy on the ground.. now its time to get to work
    Martin cougarIII elite nitrous C cam X system & HHA
    Darton Fury recurve

    http://www.cascadianbowmen.org/

  7. #7
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,762
    Post Thanks / Like

    Default

    I'll be back up in May, got to do those remodels on the GrubHorn, but I'll bring a bow or two with me. Copterdoc says a 3 inch longer string to swap the B nitrous for the C's. And speaking of C cams, might want to pm those 3 I mentioned.
    Last edited by elkslayer4x5; 01-25-2011 at 03:02 PM.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  8. #8
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,755
    Post Thanks / Like

    Default

    If you need Martin specs. just go to www.Copterdoc.com

    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •