Nitrous camed bows

[ElkSlayer]

Maybe a few.......

I'll bet you do...lol I sure see why

[elkslayer4x5]

I have tried about every combination you could think of, for the Bullet-X, Slayer, Cougar and Scepter. I am currently working on a Triad, that is going to be faster than anything I have ever built.

My favorite configuration for my 28" DL, is still the Bullet-X. I like the 14" limbs, and B cams with reg mods best. The 13" limbs and C cams do give me a tad more let-off, but they are also about 12 F.P.S. slower at the same DL. Even with mini-mods. I also have cracked a few sets of 13" limbs, but never (knock on wood) a set of 14" ones.

Maybe a few.......

I'll bet you do Doc! LOL
Thats funny I posted from the end of copterdocs post only see I'm late in saying the same as Elkslayer did.

[elkslayer4x5]

Come on, surely we have more nitrous camed bows still in use, post 'em up.

[wisecane]

Ok here goes....

I have an older SlayR riser with C cams shoot-through, just needs strings.

I have an 07 Slayer with B cams shoot-through

I have an older SlayR with B cams shoot-through that I "gave" my bro-in-law, however if he doesn't start shooting, I may reaquire it.

I have a Cat-Cammed Slayer on the way that "may" get changed over to the C cams and 13" limbs once it arrives.

I really wish I could get ahold of more 14" lower deflection limbs. Stuff in the 3H and lower range.

[elkslayer4x5]

I've got a set of 2M 13" limbs, that I'm too large to use, if I use Cs on 'em so I can reach my 30 1/2 draw, they'll peak at about 50#s. If I put Bs on to gain draw weight, it's too short for me.

[88notchback]

Getting a set of B cams for a 2006 Bengal project this weekend!

[wisecane]

I've got a set of 2M 13" limbs, that I'm too large to use, if I use Cs on 'em so I can reach my 30 1/2 draw, they'll peak at about 50#s. If I put Bs on to gain draw weight, it's too short for me.

Sooooo how much would you be willing to take fo those?

[elkslayer4x5]

Ok here goes....

I have an older SlayR riser with C cams shoot-through, just needs strings.

I have an 07 Slayer with B cams shoot-through

I have an older SlayR with B cams shoot-through that I "gave" my bro-in-law, however if he doesn't start shooting, I may reaquire it.

I have a Cat-Cammed Slayer on the way that "may" get changed over to the C cams and 13" limbs once it arrives.

I really wish I could get ahold of more 14" lower deflection limbs. Stuff in the 3H and lower range.

Well, we both know how difficult it is to find these in the lower deflections. Maybe we can work out a deal, but lets take negotiations off the board, pm me with an offer.

[Spiker]

[rjd]

Would like to see a Cat cammed Slayer. I really like my Firecat. That sounds like a nice set up.