Okay fellas here goes. I got my scale in the mail and got the weight measured. It was only 58# at spec string/cable lengths. So I added twists again to the cables until I hit 63#. My draw length is at 29.5. Got the cams retimed. Also I changed out the factory center serving as it was very large and my arrow nocks were wearing a flat spot in the serving and had very high retention on the string. Plus, the factory center serving is like 10" long so I reserved it with .025 serving and only for 6" of the string. Now the arrow once snapped on the string will spin freely on the string. I also removed the brass nock above my D loop and just tied it in with about 5 wraps of .020 serving string. Dug out the chrony and my 380gr arrows and low and behold.....
300fps!!!!! I'm extremely happy with this Silencer Bow!!
-2011 Martin Silencer 63# 29.5", Limbsaver prism elite .029 sight, Alpine Whisperflite drop away rest, Alpine 5 arrow quiver, G5 1/4" Meta Peep, Carbon Express 8" stabilizer, Gold Tip Warrior and Expedition Hunter (385gr), G5 Montec
-2011 Martin Silencer, 73# 29.5", Limbsaver prism elite .019 sight, QAD Ultra Rest Pro LD, Tight Spot 5 arrow quiver, 1/4" G5 Meta peep, Carbon Express 8" stabilizer, Gold Tip Expedition Hunter 7595 camo (441gr), G5 Montec BH.