Advantage Custom Strings
If you study the TRG system from the riser, I'm now a little disappointed. First, that the hole is so far off center that the hole is exposed to full depth doesn't leave a "clean" looking riser. Second, I don't understand why the unit could not be adjustable throughout. Okay, you can move the SOS, but not the TRG. Third, for some 12 years and more the standard slide and guide rod has been used quite successfully and more so successfully provided a hardened offset guide rod was used.
To have a open mind, think outside the box, have ideas is great, but then there is acceptance by the public. Some ideas are really great, but need "eased" in or "hammer tested" before going full throttle.
To me it sounds like a business opportunity for someone who can make a TRG out of Delrin or Teflon.
Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade
So with the plastic wearing on the TRG,is it gonna need replacing faster than a set of strings?
2011 Firecat 400
2013 PSE Drive
2012 PSE Brute X
From what I was told by my Martin Rep, they originally were going to serve the cables where they went through the TRG, but found that it didn't work well. As far as wear on the TRG, after 1000+ shots on my Firecat, I can't see any sign of wear, other than the small amount of plastic that ends up on my cables. It's easily wiped off with a piece of old blue jean material, then I just re-slicken the cables with conditioner. No visible sign of any wear at all on the TRG system.