Bengal Speed...? A little dissappointed..

[RLW]

From your post on the other tread, where you mention 32.875" A-T-A:

if my ata is longer by a few 8ths of an inch.....what does that mean or do....and does that figure into the quality control of martin...?
how do you get it back to spec....?

This probably happened when Vapor Trail string/cable were put on.......AND this may explain why a F7 module is giving you 29"

Hopefully somebody will verify this, but I think twisting string/cable to get you back down close to 32.0" ATA will require module change to F5 to get the 29" draw back.......and I'm guessing speed will come up.

You also mentioned brace weight of 7" which is right, but that isn't from bowstring. You take a string/thread stretched tight between axles and measure from that string.
From bowstring it would be higher

[WestMichiganBowhunter]

From your post on the other tread, where you mention 32.875" A-T-A:



This probably happened when Vapor Trail string/cable were put on.......AND this may explain why a F7 module is giving you 29"

Hopefully somebody will verify this, but I think twisting string/cable to get you back down close to 32.0" ATA will require module change to F5 to get the 29" draw back.......and I'm guessing speed will come up.

You also mentioned brace weight of 7" which is right, but that isn't from bowstring. You take a string/thread stretched tight between axles and measure from that string.
From bowstring it would be higher

i went and checked the module on the cam....it's the F5 mod.

[gravedigger]

i just got the fps on my 2010 bengal today.i have the f4 mod,28.5 draw,73# pull and im shooting 308 fps.gt pro hunter arrows cut down to 27.5,8.9 gpi.

[MLN1963]

i just got the fps on my 2010 bengal today.i have the f4 mod,28.5 draw,73# pull and im shooting 308 fps.gt pro hunter arrows cut down to 27.5,8.9 gpi.

Did they weight your arrows for you? If so what do they weigh?

[gravedigger]

Did they weight your arrows for you? If so what do they weigh?

they did not weigh them,i am going back in this week if not early next week.i will have them weigh a arrow and i will get back to ya on that.

[gravedigger]

and my arrows have vanetech vanes,gt knock.they are rated 75-95#,ther light weight hard hitting arrows.i really like them.fly straight as narow

[bfisher]

From your post on the other tread, where you mention 32.875" A-T-A:



This probably happened when Vapor Trail string/cable were put on.......AND this may explain why a F7 module is giving you 29"

Hopefully somebody will verify this, but I think twisting string/cable to get you back down close to 32.0" ATA will require module change to F5 to get the 29" draw back.......and I'm guessing speed will come up.

You also mentioned brace weight of 7" which is right, but that isn't from bowstring. You take a string/thread stretched tight between axles and measure from that string.
From bowstring it would be higher

With all due respect I do disagree with the explanation for measuring brace height. Brace height is, indeed, measured from the bowstring to the deepest part of the grip. Using a string from axle to axle is the method of checking tiller in single cam bows.

[Arrow Splitter]

With all due respect I do disagree with the explanation for measuring brace height. Brace height is, indeed, measured from the bowstring to the deepest part of the grip. Using a string from axle to axle is the method of checking tiller in single cam bows.

X2 Right on, Barry.

[RLW]

With all due respect I do disagree with the explanation for measuring brace height. Brace height is, indeed, measured from the bowstring to the deepest part of the grip. Using a string from axle to axle is the method of checking tiller in single cam bows.

OOPS! .......I know that....sorry
NOTE to self: Slow down, think, then type