You probably need to reposition the draw stop. It might be stopping you just short of the cams full letoff position. I'm not real good at explaining things, but you need to move the draw stop toward the "+" end of the slot in small increments, like maybe 1/8". It doesn't take much. If you go too far you feel it as the back wall will get spongy.
Originally Posted by gravediggermtv
Now, in doing so if the draw length gets too long you'll likely have to put in the next smaller module and start over. Or you could move the string to the shorter peg in the cam and start again with the draw stop. Be advised that changing to the second peg on the cam will call for relocating the nocking point, and whatever else you have on the string so measure them before you start.
If You're Not Living on the Edge You're Taking Up Too Much Space
Martin/Rytera Staff Shooter
PSAA Life member, UBP Life member
PADI AOW Diver