Results 1 to 4 of 4

Thread: Shadowcat Specifications?

  1. #1
    Senior Member
    Join Date
    Nov 2010
    Location
    Indiana
    Posts
    357
    Post Thanks / Like

    Default Shadowcat Specifications?

    I replaced the cracked limbs on my 2010 SC. The ATA comes out fine at 41.25 inches. The brace height is 7.5 inches and the spec page on the Martin web site lists it at 7.75. These limbs are 60# where my original limbs were 50#. Is there a difference in the lengths of the two different sets? Or is the difference only in the thickness of them?

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,563
    Post Thanks / Like

    Default

    Thickness. I think all the bows have 13" limbs this year.

    Check with Montalaar or Sonny Thomas. They both have ShadowCats so could tell you if you have the correct limb deflection.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  3. #3
    Senior Member
    Join Date
    Nov 2010
    Location
    Indiana
    Posts
    357
    Post Thanks / Like

    Default

    Thanks for the reply.

  4. #4
    SonnyThomas
    Guest

    Default Shadowcat Specifications?

    What I understand is that correctly twisted strings and all the Shadowcat will come out 41 1/4" for ata. Mine came out 41 5/16". Brace height given for the 2011 Shadows is 7 3/4" whereas the 2010 Shadow has 7 1/2".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •