martin cam and module identification

[Joshua Husemann]

could someone help me identify these cams and modules? on an older Maverick 3D bow.
I need replacement modules to shorten the draw. these say 4X on the modules. the bow is currently at 29" according to the tag. I need 27 or 28. any help?http://i383.photobucket.com/albums/o...20110525_3.jpg

[Joshua Husemann]

could someone help me identify these cams and modules? on an older Maverick 3D bow.
I need replacement modules to shorten the draw. these say 4X on the modules. the bow is currently at 29" according to the tag. I need 27 or 28. any help?

[HawgEnvy]

is there a sticker on the bottom limb? Snap a pic n post it up.

[cjchasman]

http://martinarchery.com/mtechforum/...D-Compound-bow.

Don't know if this will help.

[Spiker]

Looks like Ultra Sonic cams. The mods may still be available from Martin, give them a call. If not - there are usually ones for sale on ebay.
You need a pair of 2x (27") or 3x (28")

[Joshua Husemann]

hawgenvy, the sticker is too faded to photo but the info is as follows

peak weight 50-65
% let off 65%
string length 35
draw length 28 (has been changed)
bow # 44209

also, I found some mods on ebay the X style but the they are a bit differently shaped
here is the link to the auction

http://cgi.ebay.com/Martin-Cam-modul...item3a6625155c

will these work even though they are a bit different?

does anyone here have any available to sell? 2X and 3X?

[archerx7]

The 4x mods in the ebay pic appear to be the same as the 4x ones on your bow. Each number mod is going to look a little different than the other ones.

As spiker said, call Martin, they may have a set there but I wouldn't count on it.